Posted 20 hours ago

TP-Link AX1800 Wireless Dual Band Ceiling Mount Access Point, Wi-Fi 6 , Gbps Ethernet port support 802.3at PoE+, Ultra-High Performing Enterprise Wireless for High-Density Environments(EAP620 HD)

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) §, Centralized Cloud Management, and Intelligent Monitoring.

During testing, I noticed that in the 5 GHz band, the access point chooses a frequency in the 5.2 GHz band, reluctantly climbing higher. In contrast to the narrow-beam ceiling models, there is very good horizontal coverage, so even if the EAP620 HD is hanging on a wall, the entire plane of this wall has the same good coverage as in the front, in front of the AP.IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6 Despite the fact that in general TP-Link EAP620 HD looks just revolutionary, you should be aware that by business standards this is an entry-level access point, created exclusively for distributing a wireless network to clients, of which there can be up to 512 devices. There is no WDS, no PPoE client, and no routing tinsel. That is, the access point cannot act as a client of Wi-Fi networks and connect to the Internet itself. It cannot act as a controller for other access points and configure MESH and 802.11 k/r without a third-party controller. Centralized Management: Cloud access and Omada app for ultra convenience and easy management of multiple devices from a single interface. PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations. What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16194

Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-2022 55814 Ultra-Fast WiFi 6 Speeds:Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. † What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 87420 Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client.The Wi-Fi 6 standard is so radically different from previous generations of wireless networks that today it makes no sense to install 802.11ac equipment, and even more so - in busy networks with a large number of wireless networks, the more clients start switching to Wi-FI 6, the less busy the radio environment will be. No one doubts the benefits of OFMDA and 1024-QAM technologies, which promise to quadruple average throughput through better spectrum utilization and improvements for dense deployments. The question, as always, rests on the cost of such equipment. Today we will consider a budget version of a Wi-Fi 6 hotspot from TP-Link. PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations

Ultra-Fast WiFi 6 Speeds:Up to simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz bands totals 1775 Mbps Wi-Fi speeds. It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.Increased Capacity refers to increase in median throughput under dense environment compared to standard 4×4 11ac access point. The access point has one wired 1GBase-T interface, so considering the maximum throughput of 1.7 Gbps, we mean the total exchange rate between wireless and cable devices in the case when both terminals and servers are connected via WLAN which is implied in an EDGE environment (see the overview Lenovo ThinksStation SE350 Server Edge ) or just as easy when implementing the All-Wireless principle on campus or in the workplace. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) through Omada Cloud Based Controller, Centralized Cloud Management, and Intelligent Monitoring.

Feature Filter: All User Application Requirement Troubleshooting Configuration Guide official statement Further Assistance Q&A of functional explanation or specification parameters FAQs Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)


Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. △ Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. △

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment